How Does A Pool Heat Pump Warm The Water?

 

Heat pumps are efficient equipment because they do not need to generate heat to warm the pool water. What they do is transfer the heat from the air temperature into the water. You can use a pool heat pump Brisbane for your in-ground pool when the climate is mild and humid. If you are looking to open your pool earlier in the spring or keep it open later into the fall, then it is an excellent piece of pool equipment.

 

How Does It Work?

As the water in the swimming pool runs through the pool pump, it passes a filter and a pump heater. The heat pump comes with a fan that draws in the ambient air and guides it over an evaporator coil. The liquid refrigerant inside the coil absorbs the heat from the air and turn it into a gas. Next, the warm gas passes through the compressor, creating an extremely hot gas and passing through the condenser.

 

Then, the condenser transfers the heat to the cooler pool water that circulates through the heater. The heated water returns to the swimming pool again. As the hot gas flows through the condenser coil, it returns to liquid form and back to the evaporator, where the whole process starts again.

 

What Is the Ideal Size of Heat Pump for Your Pool?

It is best to have a pool specialist perform a sizing analysis for your swimming pool to determine your pool heat pump Brisbane size. A heat pump is usually sized based on the surface area of the pool together with the difference between the pool and the air temperature.

 

Other factors such as the humidity level, wind exposure, nighttime temperature, etc., also affect the heating load for an outdoor pool. For example, if you reside in an area with cool nights, lower humidity, and higher average wind speeds at your pool surface, you will need a bigger pool pump heater.

 

To calculate the ideal domestic heat pump for your outdoor pool, follow these steps:

 

Calculate the surface area of your pool in square feet

Subtract the average temperature for the coldest month from the desired pool temperature

Decide on your desired pool temperature

Know the average temperature for the coldest month

 

What Is the Efficiency of Pool Heat Pump?

The energy efficiency of a heat pump is measured using the coefficient of performance (COP). A higher COP number tends to be more efficient. Modern air and water heat pumps can generate multiple power consumptions. The COP value is the ratio between the output and input power of the pool heat pump Brisbane. Therefore, if you want a better energy-efficiency model, get a heat pump that has a higher COP value.

 

What Is the Proper Installation and Maintenance?

Installing and maintaining your heat pump properly can help optimize its efficiency. It is best to have pool heater professional install your unit, as well as conduct maintenance or repair tasks. Check your owner's manual for a maintenance recommendations and schedule. Because of the many moving and electrical parts of a pool heat pump, it is recommended to have a periodic service by a local technician. With the right upkeep and usage, your heat pump can last 10 years or more.